1 non resettable fuses omt www.schurter.com /pg01_2 fuses surface mount fuse, 11 x 4.6 mm, time-lag t, 250 vac, 125 vdc exemplary part photo depending on part no. ul 248-14 250 vac 125 vdc time-lag t description - directly solderable on printed circuit boards standards - ul 248-14 - csa c22.2 no. 248.14 approvals - ul file number: e41599 - csa file number: 51172 applications - primary protection on smd pcbs - ac and dc applications references packaging details weblinks pdf-datasheet, html-datasheet, general product information, packaging details, approvals, ce declaration of conformity , rohs, china-rohs, reach, distributor-stock-check, detailed request for product technical data rated voltage 125 - 250 vac, 125 vdc rated current 0.75 - 5 a breaking capacity 50 a - 100 a characteristic time-lag t mounting pcb,smt admissible ambient air temp. -40 c to 125 c climatic category 40/125/21 acc. to iec 60068-1 material: housing thermoplastic, ul 94v-0 material: terminals tin-plated copper alloy unit weight 0.04 g storage conditions 0 c to 40 c, max. 70% r.h. product marking , type, rated current, approvals soldering methods reflow, wave soldering profile solderability 245 c / 3 sec acc. to iec 60068-2-58, test td resistance to soldering heat 260 c / 10 sec acc. to iec 60068-2-58, test td moisture resistance test mil-std-202, method 106e (50 cycles in a temp./mister chamber) terminal strength mil-std-202, method 211a (deflection of board 1 mm for 1 minute) thermal shock mil-std-202, method 107d (200 air-to-air cycles from -55 to +125c) case resistance acc. to eia/is-722, test 4.7 >100 m (between leeds and body) mechanical shock mil-std-202, method 213b (shock 50g, half sine wave, 11 ms) vibration, high frequency mil-std-202, method 204d shock 20 gn, 20 min, 10-2 khz, 12 cyc. resistance to solvents mil-std-202, method 215a dimension 11 mm 11 1.75 7.5 4.6 5.5 2.2 3.2 3.9 0.15 0.1 0 - 0.05 1.1 3.6 6 4.4 soldering pads
2 non resettable fuses omt www.schurter.com /pg01_2 fuses pre-arcing time rated current in 1.0 x in min. 2.0 x in min. 2.0 x in max. 3.0 x in min. 3.0 x in max. 8.0 x in min. 8.0 x in max. 0.75 a - 5 a 4 h 100 ms 60 s 70 ms 3 s 5 ms 50 ms time-current-curves time in seconds 0.00 1 0.01 0. 1 1 10 100 1000 10000 100000 1 10 multiple of rated current in all variants rated cur - rent [a] rated vol - tage [vac] rated vol - tage [vdc] breaking capacity voltage drop 1.0 in typ. [mv] power dissi - pation 1.0 i n typ. [mw] melting i2t 8.0 in typ. [a2s] order number 0.75 250 125 vdc 1) 200 150 0.36 l 3403.0129.11 0.75 250 125 vdc 1) 200 180 0.36 l 3403.0129.24 1 250 125 vdc 1) 146 146 0.99 l 3403.0116.11 1 250 125 vdc 1) 92 92 0.7 l 3403.0116.24 1.25 250 125 vdc 1) 89 111 1 l 3403.0117.11 1.25 250 125 vdc 1) 89 111 1 l 3403.0117.24 1.5 250 125 vdc 2) 74 111 2 l 3403.0130.11 1.5 250 125 vdc 2) 74 111 2 l 3403.0130.24 2 250 125 vdc 2) 69 138 4 l 3403.0119.11 2 250 125 vdc 2) 69 138 4 l 3403.0119.24 2.5 125 125 vdc 3) 68 170 7 l 3403.0120.11 2.5 125 125 vdc 3) 68 170 7 l 3403.0120.24 3 125 125 vdc 3) 62 186 12 l 3403.0131.11 3 125 125 vdc 3) 62 186 12 l 3403.0131.24 3.5 125 125 vdc 3) 60 210 19 l 3403.0132.11 3.5 125 125 vdc 3) 60 210 19 l 3403.0132.24 4 125 125 vdc 3) 60 240 23 l 3403.0122.11 4 125 125 vdc 3) 60 240 23 l 3403.0122.24 5 125 125 vdc 3) 57 285 37 l 3403.0123.11 5 125 125 vdc 3) 57 285 37 l 3403.0123.24 most popular. availability for all products can be searched real-time: http://www.schurter.com/stock-check/stock-check-schurter
3 non resettable fuses omt www.schurter.com /pg01_2 fuses rated cur - rent [a] rated vol - tage [vac] rated vol - tage [vdc] breaking capacity voltage drop 1.0 in typ. [mv] power dissi - pation 1.0 i n typ. [mw] melting i2t 8.0 in typ. [a2s] order number 1) 100 a @ 250 vac / 100 a @ 125 vdc 2) 50 a @ 250 vac / 100 a @ 125 vac / 100 a @ 125 vdc 3) 100 a @ 125 vac / 100 a @ 125 vdc packaging unit .xx = .11 plastic bag (100 pcs.) .xx = .24 blister tape 33 cm reel (2000 pcs.) the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments. information furnished is believed to be accurate and reliable. however, users should independently evaluate the suitability and test each product selected for their own applications. 19.11.2016
|
